Galaxy Interactive Tools (GxITs) are a method to run containerized tools that are interactive in nature. Interactive Tools typically run a persistent service accessed on a specific port and run until terminated by the user. One common example of such a tool is Jupyter Notebook. Galaxy Interactive Tools are similar in purpose to Galaxy Interactive Environments (GIEs), but are implemented in a significantly different manner. Most notably, instead of directly invoking containers on the Galaxy server, dedicated Docker node, or as a Docker Swarm service (as is done for GIEs), Interactive Tools are submitted through Galaxy’s job management system and thus are scheduled the same as any other Galaxy tool - on a Slurm cluster, for instance. Galaxy Interactive Tools were introduced in Galaxy Release 19.09.

Comment: Evolving Topic

Galaxy Interactive Tools are a relatively new and rapidly evolving feature and there are some rough edges. Work to improve the experience of deploying and using them is ongoing. Please watch the Galaxy Release Notes for updates, changes, new documentation, and bug fixes.

This tutorial has not been updated for Galaxy 23.0+ and Gravity. You may find extra information about Interactive Tools on the Galaxy Documentation.

Warning: Before You Continue - Wildcard DNS Certificates

If you are not completing this tutorial as part of a Galaxy Admin Training course, you will need a wildcard DNS record for your Galaxy server and a method for obtaining a wildcard SSL certificate for your Galaxy server.

Galaxy Interactive Tools require a wildcard SSL certificate. Because the Galaxy Installation with Ansible tutorial fetches Let’s Encrypt certificates, this tutorial fetches Let’s Encrypt wildcard certificates. However, this process is only valid for Galaxy Admin Training courses, because Let’s Encrypt wildcard certificates can only be fetched using the DNS-01 challenge method, which requires control of a dynamic DNS server (which we have preconfigured for use at training courses). Configuring your DNS service for dynamic updates is outside the scope of this tutorial, but it will show you how to request certificates using DNS-01, which can be adapted for your site.

If you are using Let’s Encrypt, a list of available DNS plugins for Certbot can be found in the Certbot documentation. If you are not using Let’s Encrypt, please consult your certificate vendor’s documentation for information on how to obtain a wildcard certificate. You will need a certificate with (at least) the subject alternative names galaxy.example.org and *.ep.interactivetool.galaxy.example.org (where galaxy.example.org is the hostname of your Galaxy server).

You will also need a wildcard DNS CNAME record for *.ep.interactivetool.galaxy.example.org. You can verify that your Galaxy server has such a record using the host or dig command line tools like so:

   $ host -t cname foo.ep.interactivetool.live.usegalaxy.eu
   foo.ep.interactivetool.live.usegalaxy.eu is an alias for usegalaxy.eu.
   $ host -t cname bar.ep.interactivetool.live.usegalaxy.eu
   bar.ep.interactivetool.live.usegalaxy.eu is an alias for usegalaxy.eu.

Please consult your DNS server software or cloud provider’s documentation for information on how to set up a wildcard record.

Warning: Uses Ansible!

If the terms “Ansible,” “role,” and “playbook” mean nothing to you, please check out the Ansible introduction slides and the Ansible introduction tutorial.

Warning: Have you installed Galaxy?

This tutorial builds upon the work in the Galaxy Installation with Ansible tutorial, please ensure that you have completed that tutorial first.

Agenda

1. Installing Ansible Roles
2. Installing Docker
3. Installing the Interactive Tools Proxy
4. Proxying the Proxy
5. Getting a Wildcard SSL Certificate
6. Enabling Interactive Tools in Galaxy
7. Run an Interactive Tool
8. Securing Interactive Tools

Installing Ansible Roles

We will use several Ansible roles for this tutorial. In order to avoid repetetively adding them to requirements.yml and installing them, we can simply install them all before getting started. Each role will be discussed in further detail later in the tutorial.

Hands-on: Installing New Ansible Roles

1. In your working directory, add the docker role to your requirements.yml:

   - src: geerlingguy.docker
     version: 6.1.0
   - src: usegalaxy_eu.gie_proxy
     version: 0.1.0
   

2. Install the requirements with ansible-galaxy:

   ansible-galaxy role install -p roles -r requirements.yml
   

Installing Docker

Currently, Galaxy Interactive Tools must be run in Docker containers. It may be possible to run them in Singularity or other types of containers in the future. Thus, the first step is ensuring that the nodes where Galaxy will run have Docker installed. Both the Galaxy Project and Galaxy Project EU organizations have their own docker roles, but these are not published to Ansible Galaxy because they were mostly developed for internal purposes. For now, we will use the docker role by the prolific Ansible Galaxy publisher, Jeff Geerling (geerlingguy). Have a look at the geerlingguy.docker README and defaults/main.yml to get an understanding of what variables are used to control the role.

Question

What variables might be relevant to using this role?

Solution

The docker_users variable (a list) controls which users are able to interact with the Docker daemon, which our Galaxy user will need to do. Additionally, Docker Compose is configured by default, which we do not need, so it can be disabled with docker_install_compose: false.

Comment: Ansible Best Practices

If you’ve set up your Galaxy server using the Galaxy Installation with Ansible tutorial, you will have created a galaxyservers group in your inventory file, hosts, and placed your variables in group_vars/galaxyservers.yml. Although for the purposes of this tutorial, the Galaxy server and cluster node are one and the same, in a real world deployment they are very likely to be different hosts. We will continue to use the galaxyservers group for simplicity, but in your own deployment you should consider creating an additional group for cluster nodes.

Hands-on: Installing Docker with Ansible

1. Edit the group variables file, group_vars/galaxyservers.yml:

   The relevant variables to set for this role are:

   Variable	Type	Description
   docker_users	list of strings	List of users to be added to the docker group
   docker_install_compose	boolean	Whether to install and configure Docker Compose

   Add the following lines to your group_vars/galaxyservers.yml file:

   # Interactive Tools
   docker_install_compose: false
   docker_users:
     - "{{ galaxy_user.name }}"
   

   Question

   Why is "{{ galaxy_user.name }}" specified instead of just the user galaxy?

   Solution

   Duplicating values is never a good idea. If we needed to change the Galaxy user down the line or wanted to reuse this playbook on another host where the Galaxy username was different, we would have to change the value in multiple locations.

2. Add the new role to the list of roles under the roles key in your playbook, galaxy.yml:

   ---
   - hosts: galaxyservers
     become: true
     roles:
       # ... existing roles ...
       - geerlingguy.docker
   

3. Run the playbook:

   ansible-playbook galaxy.yml
   

Congratulations, you’ve set up Docker. Verify the installation using the docker info command (but keep in mind: what users did we authorize to interact with Docker?).

Installing the Interactive Tools Proxy

When an Interactive Tool’s Docker container starts, it will be assigned a random port. In order to connect clients to the Interactive Tool, Galaxy needs to determine this port (and the node on which the tool is running) and configure a proxy from Galaxy to the GxIT’s host and port. Consider the following example of running the Jupyter Notebook Interactive Tool, shown in Figure 1 below:

• nginx listens for requests from the client on port 443 (https)
• Requests for Galaxy are delivered from nginx to Galaxy over a UNIX domain socket
• Requests for Interactive Tools are delivered from nginx to the Interactive Tools Proxy over (by default) port 8000 (http)
  • GxIT http requests are forwarded by the proxy to Docker on the node on the container’s (randomly assigned) port 32768
  • GxIT http requests are again forwarded by Docker to Jupyter on its in-container “published” port 8888

Open image in new tab

As you can see, the client only ever speaks to nginx on the Galaxy server running on the standard https port (443), never directly to the interactive tool (which may be running on a node that does not even have a public IP address). The mapping of GxIT invocation and its corresponding host/port is kept in a SQLite database known as the Interactive Tools Session Map, and the path to this database is important, since both Galaxy and the proxy need access to it.

The GIE Proxy is written in Node.js and requires some configuration. Thankfully there is an Ansible role, usegalaxy_eu.gie_proxy, that can install the proxy and its dependencies, and configure it for you. As usual, have a look through the README and defaults to investigate which variables you might need to set before continuing.

Hands-on: Installing the Proxy with Ansible

1. Edit the group variables file, group_vars/galaxyservers.yml:

   The relevant variables to set for this role are:

   Variable	Type	Description
   gie_proxy_dir	path (string)	Path of directory into which the proxy application will be installed
   gie_proxy_git_version	string	Git reference to clone
   gie_proxy_setup_nodejs	string	Whether to install Node.js, options are package and nodeenv
   gie_proxy_virtualenv_command	string	Command to create virtualenv when using nodeenv method
   gie_proxy_nodejs_version	string	Version of Node.js to install if using nodeenv method
   gie_proxy_virtualenv	path (string)	Path of virtualenv into which nodeenv/Node.js/npm will be installed
   gie_proxy_setup_service	string	Whether to configure the proxy as a service, only option is systemd
   gie_proxy_sessions_path	path (string)	Path of Interactive Tools sessions map
   gie_proxy_path_prefix	path (string)	Requests accessing this cause the proxy to behave differently. It must be configured to /interactivetool/ep to make Path-based Interactive Tools work.

   Add the following lines to your group_vars/galaxyservers.yml file:

   gie_proxy_dir: /srv/galaxy/gie-proxy/proxy
   gie_proxy_git_version: main
   gie_proxy_setup_nodejs: nodeenv
   gie_proxy_virtualenv_command: "{{ pip_virtualenv_command }}"
   gie_proxy_nodejs_version: "14.21.3"
   gie_proxy_virtualenv: /srv/galaxy/gie-proxy/venv
   gie_proxy_setup_service: systemd
   gie_proxy_sessions_path: "{{ galaxy_mutable_data_dir }}/interactivetools_map.sqlite"
   gie_proxy_path_prefix: /interactivetool/ep
   

   We have chosen to install Node.js using nodeenv because the version in the training image’s package manager is fairly old.

2. Add the new role to galaxy.yml:

   - hosts: galaxyservers
     become: true
     roles:
       # ... existing roles ...
       - geerlingguy.docker
       - usegalaxy_eu.gie_proxy
   

3. Run the playbook:

   ansible-playbook galaxy.yml
   

Question

What did running the playbook change?

Solution

1. A new Python venv was created at /srv/galaxy/gie-proxy/venv
2. Node.js version 14.21.3 was installed in to the venv
3. The proxy was cloned to /srv/galaxy/gie-proxy/proxy
4. The proxy’s Node dependencies were installed to /srv/galaxy/gie-proxy/proxy/node_modules using the venv’s npm
5. A systemd service unit was installed at /etc/systemd/system/galaxy-gie-proxy.service
6. The systemd daemon was reloaded to read this new service unit
7. The service was set to start on boot and started

Because the proxy runs as a systemd service, you can inspect the log of the service using journalctl. The service name is galaxy-gie-proxy:

$ sudo journalctl -eu galaxy-gie-proxy
Feb 14 17:38:49 gcc-4 systemd[1]: Started Galaxy IE/IT Proxy.
Feb 14 17:38:49 gcc-4 node[3679]: Watching path /srv/galaxy/var/interactivetools_map.sqlite

Comment: Note

You can ignore errors about failing to read the sessions map file for now - Galaxy will create it when it’s needed.

Proxying the Proxy

As explained in the previous section, we will proxy the Interactive Tools Proxy with nginx so that it can serve requests on the standard HTTPS port, 443. Because we’ve configured nginx with Ansible, this is relatively simple.

Hands-on: Installing the Proxy with Ansible

1. Edit the group variables file, group_vars/galaxyservers.yml and add a new item to the existing nginx_ssl_servers so it matches:

   nginx_ssl_servers:
     - galaxy
     - galaxy-gie-proxy
   

   The nginx configuration galaxy-gie-proxy doesn’t exist yet, but we’ll create it in a moment.

2. Create templates/nginx/galaxy-gie-proxy.j2 with the following contents:

   server {
       # Listen on port 443
       listen       *:443 ssl;
       # Match all requests for the interactive tools subdomain
       server_name  *.interactivetool.{{ inventory_hostname }};
   
       # Our log files will go here.
       access_log  syslog:server=unix:/dev/log;
       error_log   syslog:server=unix:/dev/log;
   
       # Proxy all requests to the GIE Proxy application
       location / {
           proxy_redirect off;
           proxy_http_version 1.1;
           proxy_set_header Host $host;
           proxy_set_header X-Real-IP $remote_addr;
           proxy_set_header Upgrade $http_upgrade;
           proxy_set_header Connection "upgrade";
           proxy_pass http://localhost:{{ gie_proxy_port }};
       }
   }
   

3. To enable Path-based Interactive Tools, open templates/nginx/galaxy.j2 and add the following contents:

   server {
       # ... existing settings ...
   
       # Route all path-based interactive tool requests to the InteractiveTool proxy application
       location ~* ^/(interactivetool/.+)$ {
           proxy_redirect off;
           proxy_http_version 1.1;
           proxy_set_header Host $host;
           proxy_set_header X-Real-IP $remote_addr;
           proxy_set_header Upgrade $http_upgrade;
           proxy_set_header Connection "upgrade";
           proxy_pass http://localhost:{{ gie_proxy_port }};
       }
   
       # ... other existing settings ...
   }
   

4. Run the playbook:

   ansible-playbook galaxy.yml
   

Getting a Wildcard SSL Certificate

During the Galaxy Installation with Ansible tutorial, we acquired an SSL certificate for our Galaxy server from Let’s Encrypt. This certificate was issued for the hostname of your Galaxy server (e.g. galaxy.example.org). SSL certificates are valid only for the name to which they were issued. This presents a problem for us due to the way that Galaxy Interactive Tools work.

In order to ensure each Interactive Tool’s cookies are unique, and to provide each tool with a unique entry point, they are served from a subdomain of your Galaxy server (e.g. <unique-id>.ep.interactivetool.galaxy.example.org). Your SSL cert is not valid for this subdomain. Further, in order to support the random <unique-id> in the hostname, we need a wildcard certificate for *.ep.interactivetool.galaxy.example.org.

This process is highly dependent on your site; specifically, your SSL certificate vendor, and your DNS server software or cloud provider.

Let’s Encrypt, the SSL certificate vendor we use in our tutorials, can only generate wildcard certificates using the DNS-01 challenge method, which works by issuing a dynamic DNS update to set the requested domain’s TXT record.

If you are completing this tutorial as part of a Galaxy Admin Training course, we might have precreated a dynamic DNS server that you will use for this step. The TSIG key that allows you to perform dynamic DNS updates will be provided to you. Your instructor will also tell you which option to follow (1 or 2), depending on the DNS provider that was chosen for this course.

As we use Let’s Encrypt in staging mode, the wildcard certificates generated with either option 1 or 2 will still be invalid, and you will still see a warning in your web browser when accessing an Interactive Tool. If this warning is not a problem for you, you can just skip this section of the tutorial, and move on to “Enabling Interactive Tools in Galaxy”.

Hands-on: Requesting a Wildcard Certificate with Certbot using Ansible - Option 1 (rfc2136)

This method uses a DNS provider hosted by the Galaxy Project.

1. Edit the group variables file, group_vars/galaxyservers.yml:

   The relevant variables to set for this role are:

   Variable	Type	Description
   certbot_domains	list	List of domains to include as subject alternative names (the first will also be the certificate’s common name)
   certbot_dns_provider	string	Name of Certbot DNS plugin to use
   certbot_dns_credentials	dictionary	Plugin-specific credentials for performing dynamic DNS updates
   certbot_expand	boolean	Whether to “expand” an existing certificate (add new domain names to it)

   • Add a new item to the existing certbot_domains list so it matches:

     certbot_domains:
       - "{{ inventory_hostname }}"
       - "*.ep.interactivetool.{{ inventory_hostname }}"
     

   • Comment out the existing certbot_auth_method like so:

     #certbot_auth_method: --webroot
     

     Although this is not explicitly required (setting certbot_dns_provider as we do overrides this setting), doing so is less confusing in the future, since it makes it clear that the “webroot” method for Let’s Encrypt WEB-01 challenges is no longer in use for this server.

   • Add the following lines to your group_vars/galaxyservers.yml file:

     certbot_dns_provider: rfc2136
     certbot_dns_credentials:
       server: ns-training.galaxyproject.org
       port: 53
       name: certbot-training.
       secret: <SECRET PROVIDED BY INSTRUCTOR>
       algorithm: HMAC-SHA512
     

2. Run the playbook with certbot_expand:

   ansible-playbook galaxy.yml -e certbot_expand=true
   

   Question

   What is the -e flag to ansible-playbook and why did we use it?

   Solution

   As per ansible-playbook --help:

     -e EXTRA_VARS, --extra-vars EXTRA_VARS
                           set additional variables as key=value or YAML/JSON, if
                           filename prepend with @
   

   We used this flag because certbot_expand only needs to be set once, when we are adding a new domain to the certificate. It should not be enabled on subsequent runs of the playbook, or else we would request a new certificate on each run! Thus, it does not make sense to add it to a vars file.

   Be patient! The certificate request step can take time due to the time allowed for DNS propagation to occur.

Hands-on: Requesting a Wildcard Certificate with Certbot using Ansible - Option 2 (route53)

This method uses route53, the Amazon Web Services DNS provider. To manage connection to AWS, we will first install a specific role.

1. In your working directory, add the aws_cli role to your requirements.yml:

   - src: usegalaxy_eu.aws_cli
     version: 0.0.1
   

2. Install the requirements with ansible-galaxy:

   ansible-galaxy role install -p roles -r requirements.yml
   

3. Open galaxy.yml with your text editor to add the role usegalaxy_eu.aws_cli just before the nginx role:

   diff --git a/galaxy.yml b/galaxy.yml
   --- a/galaxy.yml
   +++ b/galaxy.yml
   @@ -21,6 +21,7 @@
          become: true
          become_user: galaxy
        - usegalaxy_eu.galaxy_systemd
   +    - usegalaxy_eu.aws_cli
        - galaxyproject.nginx
        - geerlingguy.docker
        - usegalaxy_eu.gie_proxy
   

   Tip: How to read a Diff

   If you haven’t worked with diffs before, this can be something quite new or different.

   If we have two files, let’s say a grocery list, in two files. We’ll call them ‘a’ and ‘b’.

   Input: Old

   $ cat old
   🍎
   🍐
   🍊
   🍋
   🍒
   🥑
   

   Output: New

   $ cat new
   🍎
   🍐
   🍊
   🍋
   🍍
   🥑
   

   We can see that they have some different entries. We’ve removed 🍒 because they’re awful, and replaced them with an 🍍

   Diff lets us compare these files

   $ diff old new
   5c5
   < 🍒
   ---
   > 🍍
   

   Here we see that 🍒 is only in a, and 🍍 is only in b. But otherwise the files are identical.

   There are a couple different formats to diffs, one is the ‘unified diff’

   $ diff -U2 old new
   --- old	2022-02-16 14:06:19.697132568 +0100
   +++ new	2022-02-16 14:06:36.340962616 +0100
   @@ -3,4 +3,4 @@
    🍊
    🍋
   -🍒
   +🍍
    🥑
   

   This is basically what you see in the training materials which gives you a lot of context about the changes:

   • --- old is the ‘old’ file in our view
   • +++ new is the ‘new’ file
   • @@ these lines tell us where the change occurs and how many lines are added or removed.
   • Lines starting with a - are removed from our ‘new’ file
   • Lines with a + have been added.

   So when you go to apply these diffs to your files in the training:

   1. Ignore the header
   2. Remove lines starting with - from your file
   3. Add lines starting with + to your file

   The other lines (🍊/🍋 and 🥑) above just provide “context”, they help you know where a change belongs in a file, but should not be edited when you’re making the above change. Given the above diff, you would find a line with a 🍒, and replace it with a 🍍

   Added & Removed Lines

   Removals are very easy to spot, we just have removed lines

   --- old	2022-02-16 14:06:19.697132568 +0100
   +++ new	2022-02-16 14:10:14.370722802 +0100
   @@ -4,3 +4,2 @@
    🍋
    🍒
   -🥑
   

   And additions likewise are very easy, just add a new line, between the other lines in your file.

   --- old	2022-02-16 14:06:19.697132568 +0100
   +++ new	2022-02-16 14:11:11.422135393 +0100
   @@ -1,3 +1,4 @@
    🍎
   +🍍
    🍐
    🍊
   

   Completely new files

   Completely new files look a bit different, there the “old” file is /dev/null, the empty file in a Linux machine.

   $ diff -U2 /dev/null old
   --- /dev/null	2022-02-15 11:47:16.100000270 +0100
   +++ old	2022-02-16 14:06:19.697132568 +0100
   @@ -0,0 +1,6 @@
   +🍎
   +🍐
   +🍊
   +🍋
   +🍒
   +🥑
   

   And removed files are similar, except with the new file being /dev/null

   --- old	2022-02-16 14:06:19.697132568 +0100
   +++ /dev/null	2022-02-15 11:47:16.100000270 +0100
   @@ -1,6 +0,0 @@
   -🍎
   -🍐
   -🍊
   -🍋
   -🍒
   -🥑
   

4. Edit the group variables file, group_vars/galaxyservers.yml:

   The relevant variables to set for this role are:

   Variable	Type	Description
   certbot_domains	list	List of domains to include as subject alternative names (the first will also be the certificate’s common name)
   certbot_dns_provider	string	Name of Certbot DNS plugin to use
   certbot_dns_credentials	dictionary	Plugin-specific credentials for performing dynamic DNS updates
   certbot_expand	boolean	Whether to “expand” an existing certificate (add new domain names to it)

   • Add a new item to the existing certbot_domains list so it matches:

     certbot_domains:
       - "{{ inventory_hostname }}"
       - "*.ep.interactivetool.{{ inventory_hostname }}"
     

   • Comment out the existing certbot_auth_method like so:

     #certbot_auth_method: --webroot
     

     Although this is not explicitly required (setting certbot_dns_provider as we do overrides this setting), doing so is less confusing in the future, since it makes it clear that the “webroot” method for Let’s Encrypt WEB-01 challenges is no longer in use for this server.

   • Add the following lines to your group_vars/galaxyservers.yml file:

     certbot_dns_provider: route53
     aws_cli_credentials:
       - access_key: "<SECRET PROVIDED BY INSTRUCTOR>"
         secret_key: "<SECRET PROVIDED BY INSTRUCTOR>"
         homedir: /root
         owner: root
         group: root
     

5. Run the playbook with certbot_expand:

   ansible-playbook galaxy.yml -e certbot_expand=true
   

   Question

   What is the -e flag to ansible-playbook and why did we use it?

   Solution

   As per ansible-playbook --help:

     -e EXTRA_VARS, --extra-vars EXTRA_VARS
                           set additional variables as key=value or YAML/JSON, if
                           filename prepend with @
   

   We used this flag because certbot_expand only needs to be set once, when we are adding a new domain to the certificate. It should not be enabled on subsequent runs of the playbook, or else we would request a new certificate on each run! Thus, it does not make sense to add it to a vars file.

You can verify that your certificate has been expanded using your browser’s developer tools:

Open image in new tab

Enabling Interactive Tools in Galaxy

A few Interactive Tool wrappers are provided with Galaxy, but they are commented out in Galaxy’s default tool config file. As a result, we need to instruct the galaxyproject.galaxy role to install a tool panel configuration file containing at least one of these tools in order to try them out. For the purposes of this tutorial, a good choice is the EtherCalc GxIT, because it has a relatively small Docker image.

Hands-on: Enabling Interactive Tools in Galaxy

1. Rather than modifying the default tool configuration file, we’ll add a new one that only references the Interactive Tools. This way, the default set of tools will still load without us having to incorporate the entire default tool config into our playbook.

   If the folder does not exist, create templates/galaxy/config next to your galaxy.yml (mkdir -p templates/galaxy/config/)

   Create templates/galaxy/config/tool_conf_interactive.xml.j2 with the following contents:

   <toolbox monitor="true">
       <section id="interactivetools" name="Interactive Tools">
           <tool file="interactive/interactivetool_ethercalc.xml" />
       </section>
   </toolbox>
   

2. We need to modify job_conf.xml to instruct Galaxy on how to run Interactive Tools (and specifically, how to run them in Docker). We will begin with a basic job conf:

   Create templates/galaxy/config/job_conf.xml.j2 with the following contents:

   <job_conf>
       <plugins workers="4">
           <plugin id="local" type="runner" load="galaxy.jobs.runners.local:LocalJobRunner"/>
       </plugins>
       <destinations>
           <destination id="local" runner="local"/>
       </destinations>
   </job_conf>
   

   Comment: Note

   Depending on the order in which you are completing this tutorial in relation to other tutorials, you may have already created the job_conf.xml.j2 file, as well as defined galaxy_config_templates and set the job_config_file option in galaxy_config (step 4). If this is the case, be sure to merge the changes in this section with your existing playbook.

3. Next, we need to configure the interactive tools destination. First, we explicitly set the destination to the default local destination since there will now be two destinations defined. Then we add a destination for submitting jobs as docker containers using the advanced sample job configuration as a guide. Finally, use the EtherCalc GxIT’s tool ID to route executions of the EtherCalc GxIT to the newly created destination:

   --- a/templates/galaxy/config/job_conf.xml.j2
   +++ b/templates/galaxy/config/job_conf.xml.j2
        <plugins workers="4">
            <plugin id="local" type="runner" load="galaxy.jobs.runners.local:LocalJobRunner"/>
        </plugins>
   -    <destinations>
   +    <destinations default="local">
            <destination id="local" runner="local"/>
   +        <destination id="interactive_local" runner="local">
   +            <param id="docker_enabled">true</param>
   +            <param id="docker_volumes">$defaults</param>
   +            <param id="docker_sudo">false</param>
   +            <param id="docker_net">bridge</param>
   +            <param id="docker_auto_rm">true</param>
   +            <param id="docker_set_user"></param>
   +            <param id="require_container">true</param>
   +        </destination>
        </destinations>
   +    <tools>
   +        <tool destination="interactive_local" id="interactive_tool_ethercalc" />
   +    </tools>
    </job_conf>
   

   Of considerable note is the docker_volumes param: the variable expansions are explained in the advanced sample job configuration. We’ll use this volume configuration for now but it has some considerable data security problems. We’ll discuss a better solution at the end of this tutorial.

4. Inform galaxyproject.galaxy of what tool configuration files to load in your group variables (group_vars/galaxyservers.yml):

   galaxy_tool_config_files:
     - "{{ galaxy_server_dir }}/config/tool_conf.xml.sample"
     - "{{ galaxy_config_dir }}/tool_conf_interactive.xml"
   

   Next, inform galaxyproject.galaxy of where you would like the job_conf.xml to reside, that GxITs should be enabled, and where the GxIT map database can be found. Watch for other conflicting configurations from previous tutorials (e.g. job_config: ...):

   galaxy_config:
     galaxy:
       # ... existing configuration options in the `galaxy` section ...
       job_config_file: "{{ galaxy_config_dir }}/job_conf.xml"
       interactivetools_enable: true
       interactivetools_map: "{{ gie_proxy_sessions_path }}"
   

   And then deploy the new config templates using the galaxy_config_templates var in your group vars:

   galaxy_config_templates:
     # ... possible existing config file definitions
     - src: templates/galaxy/config/tool_conf_interactive.xml.j2
       dest: "{{ galaxy_config_dir }}/tool_conf_interactive.xml"
     - src: templates/galaxy/config/job_conf.xml.j2
       dest: "{{ galaxy_config.galaxy.job_config_file }}"
   

5. Run the playbook:

   ansible-playbook galaxy.yml
   

6. Follow the Galaxy logs with journalctl -f -u galaxy

Run an Interactive Tool

You should now be ready to run an Interactive Tool in Galaxy!

Hands-on: Running an Interactive Tool

1. Ensure that you are logged in to your Galaxy server by checking the User menu in the masthead.

2. We’ll need an input for our test GxIT (EtherCalc). Any tabular file can be used, such as Galaxy’s 1.tabular test data. Copy this file’s URL:

   https://raw.githubusercontent.com/galaxyproject/galaxy/release_20.01/test-data/1.tabular
   

3. Click galaxy-upload Upload at the top of the tool panel (on the left side of the Galaxy UI).
4. In the resulting modal dialog, click the Paste/Fetch data button.
5. Paste the URL in the text field that has just appeared.
6. Give the new dataset a name such as tabular, if you like.
7. Click Start and then Close.
8. From the tool menu, click the Interactive Tools section, then click EtherCalc tool.
9. Ensure that your newly uploaded tabular dataset is selected as the input Some tabular dataset, then click Execute.

10. Monitor the blue info box on the next page, which will inform you when the Interactive Tool is accessible and provide you with a link to access it.

    
    

    If you navigate away from this page, you can view your running Interactive Tools from the Active InteractiveTools menu item in the User menu.

11. Click the click here to display link.

If everything has worked correctly, your browser will load EtherCalc with your tabular data preloaded. Once you’re done working with the data, return to Galaxy and stop EtherCalc by deleting its output dataset from your history, or stopping it via the interface from the Active InteractiveTools menu item in the User menu.

Securing Interactive Tools

Inspecting the Docker container of a running Interactive Tool shows the volume configuration expanded from $galaxy_root in the job destination’s docker_volumes param:

$ docker inspect $(docker ps -q) | jq '.[0].HostConfig.Binds'
[
  "/srv/galaxy/server:/srv/galaxy/server:ro",                                     # Galaxy server dir
  "/srv/galaxy/server/tools/interactive:/srv/galaxy/server/tools/interactive:ro", # EtherCalc tool wrapper parent dir
  "/srv/galaxy/jobs/000/1:/srv/galaxy/jobs/000/1:ro",                             # Per-job root dir
  "/srv/galaxy/jobs/000/1/outputs:/srv/galaxy/jobs/000/1/outputs:rw",             # Job outputs dir
  "/srv/galaxy/jobs/000/1/configs:/srv/galaxy/jobs/000/1/configs:rw",             # Job config files dir
  "/srv/galaxy/jobs/000/1/working:/srv/galaxy/jobs/000/1/working:rw",             # Job working (cwd) dir
  "/data:/data:rw",                                                               # GALAXY USER DATASETS DIR (RW!)
  "/srv/galaxy/server/tool-data:/srv/galaxy/server/tool-data:ro"                  # Galaxy reference data dir
]

As hinted earlier, there is a concerning state here: The directory containing all of the the user-generated data in Galaxy (not just the data for this job) has been mounted read-write in to the container. This configuration grants users running interactive tools full access to all the data in Galaxy, which is a very bad idea. Unlike standard Galaxy tools, where the tool’s design prevents users from writing to arbitrary paths, Interactive Tools are fully user controllable. Although EtherCalc does not provide a mechanism for writing to this path, other Interactive Tools (such as Jupyter Notebook) do.

Two solutions are discussed in the advanced sample job configuration:

1. Use the outputs_to_working_directory job configuration option, which allows you to mount datasets read-only: this prevents manipulation, but still allows GxIT users to read any dataset in your Galaxy server.
2. Use Pulsar, Galaxy’s remote job execution engine, to provide full job isolation: this avoids all access to Galaxy data, with the performance penalty of copying input dataset(s) to the job directory.

Because we want to maintain dataset privacy, Pulsar is the better choice here. And in fact, we don’t even need to set up a Pulsar server: because we only need Pulsar’s input staging and isolation features, we can use Embedded Pulsar, which runs a Pulsar server within the Galaxy application to perform these tasks. Embedded Pulsar can even interface with your distributed resource manager (aka cluster scheduler) of choice, as long as your Galaxy server and cluster both have access to a common filesystem (otherwise, you will need to use Pulsar in standalone mode; see the Running Jobs on Remote Resources with Pulsar tutorial).

Hands-on: Running Interactive Tools with Embedded Pulsar

1. Create a configuration file template for the Pulsar application at templates/galaxy/config/pulsar_app.yml.j2.

   
   

   If the folder does not exist, create templates/galaxy/config next to your galaxy.yml (mkdir -p templates/galaxy/config/).

   
   

   Add the following contents to the template:

   ---
   
   # The path where per-job directories will be created
   staging_directory: "{{ galaxy_job_working_directory }}/_interactive"
   
   # Where Pulsar state information will be stored (e.g. currently active jobs)
   persistence_directory: "{{ galaxy_mutable_data_dir }}/pulsar"
   
   # Where to find Galaxy tool dependencies
   tool_dependency_dir: "{{ galaxy_tool_dependency_dir }}"
   
   # How to run jobs (see https://pulsar.readthedocs.io/en/latest/job_managers.html)
   managers:
     _default_:
       type: queued_python
       num_concurrent_jobs: 1
   

2. Modify the job configuration file, templates/galaxy/config/job_conf.xml.j2, to configure Interactive Tools to use the embedded Pulsar runner.

   
   

   Add the embedded Pulsar runner plugin to the <plugins> section of the config:

   <plugin id="pulsar_embedded" type="runner" load="galaxy.jobs.runners.pulsar:PulsarEmbeddedJobRunner">
       <param id="pulsar_config">/srv/galaxy/config/pulsar_app.yml</param>
   </plugin>
   

   Tip: Ansible Best Practices

   We have used a bit of bad practice here: hardcoding the Pulsar config file path in to the job config file. At this point, we should convert the job config file to a template (in the same manner as the Pulsar config template). The reason we don’t do it in this tutorial is to maintain compatibility with other tutorials, but you may do so by following the same pattern as is used for the Pulsar config template.

   Next, modify the interactive_local destination to use the new runner and set the new parameter container_monitor_result to callback (explained in more detail in the next step):

   Warning: Untrusted SSL Certificates

   If you are completing this tutorial as part of a Galaxy Admin Training course, you will also need the <env> setting shown below to prevent problems with the untrusted SSL certificates in use during the course. Galaxy servers with valid SSL certificates do not need this option.

   --- a/templates/galaxy/config/job_conf.xml.j2
   +++ b/templates/galaxy/config/job_conf.xml.j2
        <destinations default="local">
            <destination id="local" runner="local"/>
   -        <destination id="interactive_local" runner="local">
   +        <destination id="interactive_local" runner="pulsar_embedded">
                <param id="docker_enabled">true</param>
                <param id="docker_volumes">$defaults</param>
                <param id="docker_sudo">false</param>
                <param id="docker_net">bridge</param>
                <param id="docker_auto_rm">true</param>
                <param id="docker_set_user"></param>
                <param id="require_container">true</param>
   +            <param id="container_monitor_result">callback</param>
   +            <env id="REQUESTS_CA_BUNDLE">/etc/ssl/certs/ca-certificates.crt</env>
            </destination>
        </destinations>
   

3. Open your galaxyservers group variables file and instruct galaxyproject.galaxy to install the Pulsar configuration file:

   Comment: Note

   Depending on the order in which you are completing this tutorial in relation to other tutorials, you may have already defined galaxy_config_templates. If this is the case, be sure to merge the changes in this step with your existing playbook.

   galaxy_config_templates:
     - src: templates/galaxy/config/pulsar_app.yml.j2
       dest: "{{ galaxy_config_dir }}/pulsar_app.yml"
   

   Additionally, you will need to set the galaxy_infrastructure_url config option:

   galaxy_config:
     galaxy:
       # ... existing configuration options in the `galaxy` section ...
       galaxy_infrastructure_url: "https://{{ inventory_hostname }}/"
   

   Details: Detail: Infrastructure URL/Callback

   Galaxy must be made aware of the randomly selected port Docker has assigned after the GxIT begins operating, in order to update the proxy map. By default, this is done by writing a JSON file in the job directory. This method does not work with Pulsar since Pulsar uses a different job directory from the Galaxy job directory. As a result, Pulsar jobs use the callback method configured in the previous step to make a request to Galaxy’s API, the URL for which is set in galaxy_infrastructure_url.

4. Run the playbook:

   ansible-playbook galaxy.yml
   

Once the playbook run is complete and your Galaxy server has restarted, run the EtherCalc Interactive Tool again.

Question

Once EtherCalc is running, check the mounts of its container. What do you observe?

Solution

$ docker inspect $(docker ps -q) | jq '.[0].HostConfig.Binds'
[
  "/srv/galaxy/jobs/_interactive/2:/srv/galaxy/jobs/_interactive/2:ro",                       # Per-job root dir
  "/srv/galaxy/jobs/_interactive/2/tool_files:/srv/galaxy/jobs/_interactive/2/tool_files:ro", # EtherCalc tool wrapper parent dir
  "/srv/galaxy/jobs/_interactive/2/outputs:/srv/galaxy/jobs/_interactive/2/outputs:rw",       # Job outputs dir
  "/srv/galaxy/jobs/_interactive/2/working:/srv/galaxy/jobs/_interactive/2/working:rw",       # Job working (cwd) dir
  "/srv/galaxy/server/tool-data:/srv/galaxy/server/tool-data:ro"                              # Galaxy reference data dir
]

Of note, the user data directory, /data, is no longer mounted in the container!

You've Finished the Tutorial

Please also consider filling out the Feedback Form as well!

Key points

• Galaxy Interactive Tools run as jobs in largely the same manner as any other Galaxy job

• nginx routes GxIT requests to the GxIT(/GIE) Proxy, which routes them to the node/port on which the GxIT is running

• GxITs require wildcard SSL certificates

• GxITs expose your Galaxy server’s user datasets unless configured to use Pulsar

Frequently Asked Questions

Feedback

Did you use this material as an instructor? Feel free to give us feedback on how it went.
Did you use this material as a learner or student? Click the form below to leave feedback.

Citing this Tutorial

1. Nate Coraor, Simon Gladman, Helena Rasche, Anthony Bretaudeau, Galaxy Interactive Tools (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/admin/tutorials/interactive-tools/tutorial.html Online; accessed TODAY
2. Hiltemann, Saskia, Rasche, Helena et al., 2023 Galaxy Training: A Powerful Framework for Teaching! PLOS Computational Biology 10.1371/journal.pcbi.1010752
3. Batut et al., 2018 Community-Driven Data Analysis Training for Biology Cell Systems 10.1016/j.cels.2018.05.012

BibTeX

@misc{admin-interactive-tools,
author = "Nate Coraor and Simon Gladman and Helena Rasche and Anthony Bretaudeau",
	title = "Galaxy Interactive Tools (Galaxy Training Materials)",
	year = "",
	month = "",
	day = ""
	url = "\url{https://training.galaxyproject.org/training-material/topics/admin/tutorials/interactive-tools/tutorial.html}",
	note = "[Online; accessed TODAY]"
}
@article{Hiltemann_2023,
	doi = {10.1371/journal.pcbi.1010752},
	url = {https://doi.org/10.1371%2Fjournal.pcbi.1010752},
	year = 2023,
	month = {jan},
	publisher = {Public Library of Science ({PLoS})},
	volume = {19},
	number = {1},
	pages = {e1010752},
	author = {Saskia Hiltemann and Helena Rasche and Simon Gladman and Hans-Rudolf Hotz and Delphine Larivi{\`{e}}re and Daniel Blankenberg and Pratik D. Jagtap and Thomas Wollmann and Anthony Bretaudeau and Nadia Gou{\'{e}} and Timothy J. Griffin and Coline Royaux and Yvan Le Bras and Subina Mehta and Anna Syme and Frederik Coppens and Bert Droesbeke and Nicola Soranzo and Wendi Bacon and Fotis Psomopoulos and Crist{\'{o}}bal Gallardo-Alba and John Davis and Melanie Christine Föll and Matthias Fahrner and Maria A. Doyle and Beatriz Serrano-Solano and Anne Claire Fouilloux and Peter van Heusden and Wolfgang Maier and Dave Clements and Florian Heyl and Björn Grüning and B{\'{e}}r{\'{e}}nice Batut and},
	editor = {Francis Ouellette},
	title = {Galaxy Training: A powerful framework for teaching!},
	journal = {PLoS Comput Biol} Computational Biology}
}

                   

Galaxy Administrators: Install the missing tools

You can use Ephemeris's shed-tools install command to install the tools used in this tutorial.

shed-tools install [-g GALAXY] [-a API_KEY] -t <(curl https://training.galaxyproject.org/training-material/api/topics/admin/tutorials/interactive-tools/tutorial.json | jq .admin_install_yaml -r)

Alternatively you can copy and paste the following YAML

---
install_tool_dependencies: true
install_repository_dependencies: true
install_resolver_dependencies: true
tools: []

Feedback

3 stars	1

June 2022

• 3 stars: Liked: The interactive tools perspective Disliked: The requirement for wildcard SSL certificate and the poor support for fulfilling this requirement. This is a major issue for the deployment of Galaxy servers. From a historical perspective, before 2019, there were IEs. Not super easy to deploy, but doable with motivation and investment in Docker knowledge. After launching the new ITs, IEs became progressively useless and ITs stay either nice demos or running on very few big public servers. Even the latter is not so clear: for instance, usegalaxy.org.au is not really providing ITs, usegalaxy.org (!) seems providing it at first glance, but the Rstudio interface - for instance - remains full blank forever. Only usegalaxy.eu to my knowledge provides effectively running and usable generalist ITs (Rstudio, Jupyter,). Thus, on that matter, where is the initial slogan "data intensive analysis for everyone" ? Of course, I am not blaming the trainers and contributors to this tutorial in any way ! But I really think that the technical strategy relying on wildcard SSL certificate to get the ITs running should be discussed with the community as a serious limitation to their use and thereby their active development. As it stands since 3 years now, ITs are out of the possibilities of a majority of Galaxy server instances because too complicated to install.