Ocean Data View (ODV)

Author(s) Marie Josse avatar Marie Josse
Overview
Creative Commons License: CC-BY Questions:
  • How to process Argo’s glider data ?

  • How to visualise the glider’s stations

  • How to use make salinity temperature profiles for one or more stations ?

Objectives:
  • Deal with netcdf files in ODV

  • Visualise ocean variables from Argo glider’s data

Requirements:
Time estimation: 1 hour
Supporting Materials:
Published: Nov 27, 2023
Last modification: Nov 27, 2023
License: Tutorial Content is licensed under Creative Commons Attribution 4.0 International License. The GTN Framework is licensed under MIT
purl PURL: https://gxy.io/GTN:T00375
version Revision: 1

Introduction

Through this tutorial you will learn here how to access, filter and import netCDF data through using ODV Galaxy interactive tool:

Ocean Data View (ODV) is a software package for the interactive exploration, analysis and visualization of oceanographic and other geo-referenced profile, time-series, trajectory or sequence data. To know more about ODV go check the official page

Agenda

In this tutorial, we will cover:

  1. Introduction
  2. Managing ODV Galaxy interactive tool
  3. Ocean Data View
    1. Map your data
    2. Create profiles curves
    3. Create one single sum-up profile curve
  4. Conclusion
  5. Extra information

Managing ODV Galaxy interactive tool

ODV is now integrated in Galaxy as an interactive tool. This kind of tools is working differently than classical tools as it allows the user to interact with a dedicated graphical interface. This kind of tools is used to give access to Jupyter notebooks, RStudio or R Shiny apps for example.

To use ODV, you need to use the dedicated form, you can specify input datasets from your hisrtory you want to use in ODV, then press the execute button to launch a ODV instance. When the graphical user interface of ODV is ready to be used, a URL will be displayed at the top of the Galaxy center panel. If you don’t see it, you can see and access it through the “Active InteractiveTools” space of the “User” menu or you can click on galaxy-eye on the tool in the history.

Once you finished your work on ODV, if you want to retrieve data and/or entire project, you need to save files in ODV/galaxy/outputs, then quit ODV properly through the “Project” Menu tab.

You can come back to where you left off the tutorial anytime by clicking level.

Hands-on: Log in to Galaxy
  1. Open your favorite browser (Chrome, Safari or Firefox as your browser, not Internet Explorer!)
  2. Browse to your Galaxy instance
  3. On the top pannel go to Login or Register

The Galaxy homepage is divided into three panels:

  • Tools on the left
  • Viewing panel in the middle
  • History of analysis and files on the right
Screenshot of the Galaxy interface, the tools panel is on the left, the main panel is in the center, and the history is on the right.Open image in new tab

Figure 1: Galaxy interface explanation

The first time you use Galaxy, there will be no files in your history panel.

Hands-on: Deploy your own ODV instance
  1. Create a new history for this tutorial nd give it a name (example: “ODV for Argo”) for you to find it again later if needed.

    To create a new history simply click the new-history icon at the top of the history panel:

    UI for creating new history

  2. Import netCDF data from amazonaws with this link an rename it “1900392_prof.nc” instead of “New File”

    https://argo-gdac-sandbox.s3-eu-west-3.amazonaws.com/pub/dac/coriolis/1900392/1900392_prof.nc
    
    • Copy the link location
    • Click galaxy-upload Upload Data at the top of the tool panel

    • Select galaxy-wf-edit Paste/Fetch Data
    • Paste the link(s) into the text field

    • Press Start

    • Close the window

  3. “Select if you are using a ODV collection in a zip folder or if you have your own raw data”: The data you are using are a Netdcdf or tabular text files
  4. Select your new data before deploying ODV instance by pressing execute
  5. Access ODV
  1. Go to User > Active InteractiveTools
  2. Wait for the ODV to be running (Job Info)
  3. Click on ODV

Argo is an international program to observe the interior of the ocean with a fleet of profiling floats drifting in the deep ocean currents (check it out on the argo site). Argo GDAC is a dataset of 5 billion in situ ocean observations from 18.000 profiling floats (4.000 active) which started 20 years ago. Argo GDAC dataset is a collection of 18.000 NetCDF files. It is a major asset for ocean and climate science, a contributor to IOCCP reports. Argo 2023

These data are available on AWS registry of Open Data. This registry exists to help people discover and share datasets that are available via AWS resources. See recent additions and learn more about sharing data on AWS.

Ocean Data View

Map your data

You can expand the ODV left panel (where there are 3 dots, vertically) to access the “clipboard” menu, and paste the content you want to paste on a ODV form. From there you can copy paste everything from one side to the other. Then, click outside of this panel to collapse it.

Image showing in transparent on the left of the ODV interface the clipboard.

If at one point your ODV interface becomes grey with a red panel “X ODV - Disconnected”, do NOT panic ;) you just need to reload your tab (circular arrow top left)

Hands-on: Loading Argo data
  1. Go to the top left of ODV and click on “Open…”
  2. Click on “1900392_prof.nc” of the pop-up screen and on Open
  3. Press Next > for “Select Dimensions (Step 1 of 4)”
  4. Press Next > for “Associate Meta Variables (Step 2 of 4)”
  5. Press Next > for “Select Primary Variable (Step 3 of 4)”
  6. Press Finish for “Subset Dimensions (Step 4 of 4)”
  7. “Enter netCDF Setup Name:” write “argo_prof_data”, then, press OK

Map of all the stations of the Argo glider.

Question
  1. What are the longitude and latitude of the red dot ?
  1. On the to right window you can read Longitude 7°E and Latitude 21°S.

Create profiles curves

Hands-on: Create a multiple windows view
  1. On the top left press +
  2. Click on 2 Station Windows Image showing where to go to have the 2 STATION Windows.
  3. Two more slots appear follow the indication and press + on your keyboard (or SHIFT and +).

Here you have created a multiple view on ODV

Hands-on: Create profiles
  1. On the biggest window click on the right side of your mousse
  2. Select X-Variable, press TEMP [degree_Celsius] and OK. Image of the selection of the pression.
  3. Select Y-Variable, press PRES [decibar] and OK. Your profile is now uspide down.
  4. To correct that click right again go on Y-Variable and on the bottom of the pop-up screen check the box “Reverse range” and OK. ODV interface with the map and the 1st profile pression temperature.
  5. For the smallest window do the same but for the abscisse select TEMP_ADJUSTED [degree_Celsius]. This can be usefull to compare the 2 curves. Resulting image of the 2 windows configurated.

You now know how to create multiple profiles curves on ODV from netCDF data.

Question

How do you do if you want to compare the profiles with another station ?

With your keyboard you can use the arrows left and right and go through the different stations one-by-one. See the profiles of another station.

Hands-on: Change the station of reference
  1. Go on the map on the bottom left
  2. Click right and select Station Filter Image on how to select the option Station Filter.
  3. Then, select and click on Customize
  4. In “Station ID” write the number of the new station of reference (both boxes)

    Everything has dissapeared !!! Don’t panik it’s totally normal ;)

    • Press + on your keyboard (or SHIFT and +)

    The curves reapeared ! And they correspond to your knew station of reference !

    To make the other stations reapear, to allow you to navigate in the other stations while conserving your new station of reference, go on the map once again.

  5. Click right and select Station Filter
  6. This time select and click on Relax

And now you’re back with all your stations visible !

Create one single sum-up profile curve

Hands-on: Create a scatter plot
  1. On the top left press +
  2. Select 1 SCATTER Window another tab opens (you now have 3 of them) Image of the new open tab for the preparation of a scatter view.
  3. On the window click on the right side of your mousse
  4. Select X-Variable, press TEMP [degree_Celsius] and OK.
  5. Select Y-Variable, press PRES [decibar], at the bottom of the pop-up check the box “Reverse range” and OK. Selection of the Pression and check of the Reverse range button on the pop-up image. You now have the final image with all the curves for each stationside by side. You can navigate in them by using the arrows left/right on your keyboard with the red curve being the station you’re on. Resulting image of the scatter plot.
Hands-on: Save your analysis
  1. Click right on the scatter image and select Save plot as
  2. In the pop-up select and go in the ODV/galaxy/outputs folder
  3. Once you’re in the folder you can rename your scatter plot in “File Name:” by “1900392_prof_scatter”
  4. You can also change the “Files of type:” by “PNG (*.png *.PNG)
  5. Click on Save, then OK and OK.
  6. On the map click right and then Save Map As…
  7. Still in the ODV/galaxy/outputs folder, rename it “1900392_prof_map” check that the “Files of type:” is “PNG (*.png *.PNG)
  8. Click on Save, then OK and OK

Now, if you have finished with your analysis you can exit ODV. To do so you need to do it properly.

  1. On th top left click on File select Exit
  2. If you want to save the other window also click on Yes. Here we don’t need it so click No.

You can now go back on your Galaxy instance.

Now, after waiting for everything to turn green in your history, you can see 2 new outputs “1900392_prof_scatter” and “1900392_prof_map”

Hands-on: View in Galaxy

In the history panel click on the galaxy-eye (eye) icon of your output.

You can now visualize the outputs in galaxy middle pannel.

Image in the middle pannel of "1900392_prof_scatter". Image in the middle pannel of "1900392_prof_map".

Conclusion

Great you now know how to use argo floater data to create profiles curves in Ocean Data View (ODV) within Galaxy.

Extra information

Coming up soon follow ups tutorials on Coastal Water Dynamics workflow (and other Earth-System related trainings). Keep an galaxy-eye open if you are interested !