Visualization of RNA-Seq results with Volcano Plot in R

Authors: orcid logoMaria Doyle avatar Maria Doyle
Overview
Creative Commons License: CC-BY Questions:
  • How to customise Volcano plot output in R?

Objectives:
  • Learn how to use R to edit Volcano plot colours, points, labels and categories

Requirements:
Time estimation: 1 hour
Level: Intermediate Intermediate
Supporting Materials:
Published: Jun 14, 2021
Last modification: Jun 14, 2024
License: Tutorial Content is licensed under Creative Commons Attribution 4.0 International License. The GTN Framework is licensed under MIT
purl PURL: https://gxy.io/GTN:T00305
rating Rating: 3.0 (0 recent ratings, 4 all time)
version Revision: 8

The Volcano plot tutorial, introduced volcano plots and showed how they can be generated with the Galaxy Volcano plot tool. In this tutorial we show how you can customise a plot using the R script output from the tool.

Agenda

In this tutorial, we will deal with:

  1. Preparing the inputs
    1. Import data
    2. Create volcano plot
    3. Import files into R
    4. Set up script
  2. Customising the plot
    1. Change points colours
    2. Change points size
    3. Change labels size
    4. Change categories
  3. Conclusion

Preparing the inputs

We will use one file for this analysis:

  • Differentially expressed results file (genes in rows, and 4 required columns: raw P values, adjusted P values (FDR), log fold change and gene labels).

If you are following on from the Volcano plot tutorial, you already have this file in your History so you can skip to the Create volcano plot step below.

Import data

Hands-on: Data upload
  1. Create a new history for this exercise e.g. Volcano plot R

    To create a new history simply click the new-history icon at the top of the history panel:

    UI for creating new history

    1. Click on galaxy-pencil (Edit) next to the history name (which by default is “Unnamed history”)
    2. Type the new name
    3. Click on Save
    4. To cancel renaming, click the galaxy-undo “Cancel” button

    If you do not have the galaxy-pencil (Edit) next to the history name (which can be the case if you are using an older version of Galaxy) do the following:

    1. Click on Unnamed history (or the current name of the history) (Click to rename history) at the top of your history panel
    2. Type the new name
    3. Press Enter

  2. Import the differentially results table.

    To import the file, there are two options:

    • Option 1: From a shared data library if available (ask your instructor)
    • Option 2: From Zenodo
    • Copy the link location
    • Click galaxy-upload Upload Data at the top of the tool panel

    • Select galaxy-wf-edit Paste/Fetch Data
    • Paste the link(s) into the text field

    • Press Start

    • Close the window

    As an alternative to uploading the data from a URL or your computer, the files may also have been made available from a shared data library:

    1. Go into Data (top panel) then Data libraries
    2. Navigate to the correct folder as indicated by your instructor.
      • On most Galaxies tutorial data will be provided in a folder named GTN - Material –> Topic Name -> Tutorial Name.
    3. Select the desired files
    4. Click on Add to History galaxy-dropdown near the top and select as Datasets from the dropdown menu
    5. In the pop-up window, choose

      • “Select history”: the history you want to import the data to (or create a new one)
    6. Click on Import

    • You can paste the link below into the Paste/Fetch box:

      https://zenodo.org/record/2529117/files/limma-voom_luminalpregnant-luminallactate
      

      Check that the datatype is tabular. If the datatype is not tabular, please change the file type to tabular.

      • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
      • In the central panel, click galaxy-chart-select-data Datatypes tab on the top
      • In the galaxy-chart-select-data Assign Datatype, select tabular from “New type” dropdown
        • Tip: you can start typing the datatype into the field to filter the dropdown menu
      • Click the Save button

Click on the galaxy-eye (eye) icon and take a look at the DE results file. It should look like below, with 8 columns.

DE results file.

Create volcano plot

We will create a volcano plot colouring all significant genes. We will call genes significant here if they have FDR < 0.01 and a log2 fold change of 0.58 (equivalent to a fold-change of 1.5). These were the values used in the original paper for this dataset. We will also label the top 10 most significant genes with their gene names. We will select to output the Rscript file which we will then use to edit the plot in R.

Hands-on: Create a Volcano plot
  1. Volcano Plot ( Galaxy version 0.0.5) to create a volcano plot
    • param-file “Specify an input file”: the de results file
    • param-file “File has header?”: Yes
    • param-select “FDR (adjusted P value)”: Column 8
    • param-select “P value (raw)”: Column 7
    • param-select “Log Fold Change”: Column 4
    • param-select “Labels”: Column 2
    • param-text “Significance threshold”: 0.01
    • param-text “LogFC threshold to colour”: 0.58
    • param-select “Points to label”: Significant
      • param-text “Only label top most significant”: 10
    • In “Output Options”:
      • param-select “Output Rscript?”: Yes

Click on the PDF file name to check that you see a plot like below.

Volcano plot labelling top significant genes.

Now we will customise the plot by editing the R code in RStudio. You can use Galaxy RStudio if available or another R such as RStudio Cloud or RStudio installed on your computer.

Import files into R

We’ll import the differentially expressed results input file and the RScript into R.

Hands-on: Using datasets from Galaxy
  1. Note the history IDs of 1) the differentially expressed results and 2) the RScript in your Galaxy history

  2. RStudio in Galaxy provides some special functions such as gx_get to import and export files from your history.

    Hands-on: Launch RStudio

    Depending on which server you are using, you may be able to run RStudio directly in Galaxy. If that is not available, RStudio Cloud can be an alternative.

    Currently RStudio in Galaxy is only available on UseGalaxy.eu and UseGalaxy.org

    1. Open the Rstudio tool tool by clicking here to launch RStudio
    2. Click Run Tool
    3. The tool will start running and will stay running permanently
    4. Click on the “User” menu at the top and go to “Active InteractiveTools” and locate the RStudio instance you started.

    If RStudio is not available on the Galaxy instance:

    1. Register for RStudio Cloud, or login if you already have an account
    2. Create a new project

  3. Copy the files we need into our workspace so we can see them in the Files pane.

    file.copy(gx_get(1), "de-results.tsv") # will copy dataset number 1 from your history, use the correct ID for your differentially expressed results dataset.
    file.copy(gx_get(3), "volcano.R") # will copy dataset number 3 from your history, use the correct ID for your Rscript dataset.
    
  4. Click on volcano.R in the Files pane to open it in the Editor pane.

We’ll have a look at the script.

Set up script

The first few lines from # Galaxy settings start to # Galaxy settings end are settings needed to run the Volcano plot tool in Galaxy. We don’t need them to run the script in R so we will delete them. If we don’t delete the error handling line, the R session will crash if we encounter any error in the code. It’s ok as it will resume again where we were but better to not have this happen.

Hands-on: Delete unneeded lines

Delete these lines from the top of the script.

   # Galaxy settings start ---------------------------------------------------

   # setup R error handling to go to stderr
   options(show.error.messages = F, error = function() {cat(geterrmessage(), file = stderr()); q("no", 1, F)})

   # we need that to not crash galaxy with an UTF8 error on German LC settings.
   loc <- Sys.setlocale("LC_MESSAGES", "en_US.UTF-8")

   # Galaxy settings end -----------------------------------------------------

We’ll check if we have the packages the script needs. We can see the packages used in the lines that have library(package)

library(dplyr)
library(ggplot2)
library(ggrepel)

When we launched Galaxy RStudio there was information in the Console letting us know that some packages are pre-installed. These packages include ggplot2 and dplyr. In this Galaxy there is a yellow warning banner across the top of the script saying Package ggrepel required is not installed. Install. Don't Show Again. So we just need to install the ggrepel package.

Hands-on: Install package

Either click on “Install” in the yellow warning banner if present, or in the Console type

install.packages('ggrepel')

We need to change the path of the differentially expressed file in the script. The path in the script is /data/dnb03/galaxy_db/files/4/6/c/dataset_46c498bc-060e-492f-9b42-51908a55e354.dat. This is a temporary location where the Galaxy Volcano plot tool copied the input file in order to use it, the file no longer exists there. Your path will be different. In the script change this path to de-results.tsv like below.

Hands-on: Run script
  1. Change the input file path in script

    # change the line
    results <- read.delim('/data/dnb03/galaxy_db/files/4/6/c/dataset_46c498bc-060e-492f-9b42-51908a55e354.dat', header = TRUE)
    
    # to
    results <- read.delim('de-results.tsv', header = TRUE)
    
  2. Highlight the code in the script and run

    • To highlight all code type CTRL+a (or CMD+a)
    • To run type CTRL+Enter (or CMD+Enter)

You should see a file called volcano_plot.pdf appear in the Files pane. Click on it to open it and you should see a plot that looks the same as the one we generated with the Volcano Plot tool in Galaxy.

We’ll delete the lines below that save the plot to a PDF file. The plots will then be produced in the Plots pane so we can more easily see the different plots we’re going to make, without having to keep opening the PDF file.

Hands-on: Produce plots in Plots pane
  1. Delete the lines below that save the plot to a PDF file

    # Open PDF graphics device
    pdf("volcano_plot.pdf")
    
    # keep the lines in between as they produce the plot
    
    # Close PDF graphics device
    dev.off()
    
  2. Highlight the code in the script and run

You should now see the plot produced in the Plots pane.

Customising the plot

Change points colours

We’ll demonstate how you can change the colours. We’ll change the colour of the downregulated genes from cornflowerblue to purple. We’ll change the upregulated genes from firebrick to orange.

Hands-on: Change colours
  1. Edit the line below in the script

    # change the line
    colours <- setNames(c("cornflowerblue", "grey", "firebrick"), c(down, notsig, up))
    
    # to
    colours <- setNames(c("purple", "grey", "orange"), c(down, notsig, up))
    
  2. Highlight the code in the script and run

Smaller points.

If you want to use other colours you can see the built-in R colours with their names in this cheatsheet.

Change points size

We’ll make the points a bit smaller. We’ll change to 0.5.

Hands-on: Change points size
  1. Edit the line below in the script

    # change the line
    geom_point(aes(colour = sig)) +
    
    # to
    geom_point(aes(colour = sig), size = 0.5) +
    
  2. Highlight the code in the script and run

Smaller points.

Question

How could we change the transparency of the points?

We could use alpha =. For example

geom_point(aes(colour = sig), alpha = 0.5)

Change labels size

We’ll make the font size of the labels a bit smaller.

Hands-on: Change labels text size
  1. Edit the line below in the script

    # change the line
    geom_text_repel(data = filter(results, labels != ""), aes(label = labels),
    
    # to
    geom_text_repel(data = filter(results, labels != ""), aes(label = labels), size = 3,
    
  2. Highlight the code in the script and run

Smaller labels.

Question

How could we change the number of genes labelled from 10 to 20?

We could change the 10 to 20 here

top <- slice_min(results, order_by = pvalue, n = 20)

Change categories

We can change the categories of points we’re colouring in the plot. For example, instead of using separate categories for upregulated, downregulated we could just use a single category for significant.

Hands-on: Change categories
  1. Change the category names to signif and notsignif

    # change
    down <- unlist(strsplit('Down,Not Sig,Up', split = ","))[1]
    notsig <- unlist(strsplit('Down,Not Sig,Up', split = ","))[2]
    up <- unlist(strsplit('Down,Not Sig,Up', split = ","))[3]
    
    # to
    signif <- "Significant"
    notsignif <- "Not significant"
    
  2. Specify which genes are signif and notsignif

    # change
    results <- mutate(results, sig = case_when(
                                fdr < 0.01 & logfc > 0.58 ~ up,
                                fdr < 0.01 & logfc < -0.58 ~ down,
                                TRUE ~ notsig))
    
    # to
    results <- mutate(results, sig = case_when(
                                fdr < 0.01 & abs(logfc) > 0.58 ~ signif, # abs() will give us absolute values i.e. all > 0.58 and < -0.58
                                TRUE ~ notsignif))
    
  3. Specify the colours for signif and notsignif

    # change
    colours <- setNames(c("purple", "grey", "orange"), c(down, notsig, up))
    
    # to
    colours <- setNames(c("grey", "red"), c(notsignif, signif))
    
  4. runHighlight the code in the script and

Categories changed.

Question

How would you remove the legend from the plot? You can use Google.

If you Google remove legend ggplot2 you may find a few ways it can be done. One way is

p <- p + theme(legend.position = "none")

You can save the edited script by clicking the galaxy-save icon at the top of the script in RStudio or through File > Save. You can download from Galaxy RStudio from the Files pane by ticking the box beside the script name, then More > Export > Download.

If you enter values in the Volcano Plot Galaxy tool form for Plot options, such as plot title, x and y axis labels or limits, they’ll be output in the script. This is one way you could see how to customise these options in the plot.

Conclusion

In this tutorial we have seen how a volcano plot can be generated and customised using Galaxy and R. You can see some more possible customisations in the RNA Seq Counts to Viz in R tutorial and at the ggrepel website.